Professional Products for the Serious Crafter

Adhesive Vinyl:
This vinyl is printed on professional quality Orajet (Oracal) vinyl and is available in a choice of permanent outdoor or removable indoor. 
  • Outdoor is a permanent, 4mil, 4 yr outdoor high quality gloss adhesive vinyl.  Great to use on glass, metal, plastic, and much more (not recommended for interior walls). 
  • Indoor (wall) is a removable, 3mil, 2 yr indoor high quality matte adhesive vinyl. Ideal for shorter-term interior wall and glass graphics, including murals. 
Please see photo with listing for an accurate representation of the pattern you will receive. The picture with this listing is the actual pattern that will be printed. Lamination is not required but may be recommended with extensive sun exposure. Normal exposure such as a car decal wouldn’t need any lamination. However, using the printed vinyl on a flat surface constantly exposed to UV rays, such as an outdoor table top, lamination would be recommended to retain color.
 
Application Instructions:
Cut pattern/design on printed side, NOT mirrored. Weed excess vinyl from around the design. Light/medium tack transfer tape may be used to transfer your image to another surface.
 
Testing:
Always test a small corner of any material to assure proper cutting depths and settings.
  
Heat Transfer Vinyl:
Digitally Printed on Siser Heat Transfer Media and requires Heat Mask for transfer (sold separately). This product is CPSIA certified as child safe being phthalate and lead free. Printed with permanent Eco-Solvent ink, each pattern will retain its color and vibrancy wash after wash. With proper application, each pattern will not peel or fade giving you years of enjoyment.
 
Applies To:
• 100% cotton
• Poly/cotton blends
• 100% polyester
• Leather
• Lycra®/spandex
 
Washing Instructions:
Turn garment inside out. Machine wash COLD with mild detergent. NO bleach. Dry at a normal dryer setting on household machines. Do not dry clean. Instructions apply to the material only, please follow garment washing instructions as well.
 
Application Instructions:
Cut pattern with the printed side facing up. DO NOT cut pattern mirrored or in reverse. Weed excess material from design. Place Heat Mask on design and squeegee into place. Peel clear back from the design. Preheat Garment for 2 to 3 seconds at 300°F/149°C. Place design and press while applying medium pressure for about 15-20 seconds and then peel HOT.
Testing:
Always test on a fabric swatch prior to production, especially on heavily treated fabrics.

Please note: Due to printing and manufacturing process, vinyl may be +/- 1/4"