Professional Products for the Serious Crafter
SISER Easy Mask Heat Transfer Tape

SISER Easy Mask Heat Transfer Tape

SISER Easy Mask Heat Transfer Tape

(for use with Digitally Printed Heat Transfer Film)

Sold in 12" x 14" sheets

Reduce waste-Cut off and use as much as you need!


  • Cut a piece of mask slightly wider than the image to cover
  • Remove the paper backing from the mask and set aside
  • Adhesive side up, place the mask down on a smooth, firm surface
  • With the image facing down, center it over the mask letting the middle drop down onto the adhesive, followed by the rest of the image.
  • Place your squeegee at a 45 degree angle over the center of the image. Using firm pressure, push the squeegee towards the outer edge of the image. This removes any trapped air creating a bond between the image and the mask.
  • Lift a corner of the mask, use a steady motion to separate the mask with the image
  • If not transferring to garment right away, place the transferred image back on the shiny side of the original masking paper you had set aside. 
  • $2.00